Hello, i have here a president harry 2 classic.Transmit and modulation is just fine.
But nothing at all at receiving....rf gain is wide open so that is not the problem.
Anyone an idea where i have to look for this problem.
President Harry 2 classic
- Pluskat
- Regular
- Posts: 18
- Joined: 05 Feb 2016, 15:28
- Call Sign: 16op234
- Location: Belgium
- astradyne
- Moderator
- Posts: 11033
- Joined: 14 Jun 2010, 09:28
- Location: Dunny On The Wolds
- Contact:
Re: President Harry 2 classic
Are you getting any noise through the speaker at all?
Never, ever, ever....bloody anything ever!
Far too many radio's to list here. But I do own a legal one...
Far too many radio's to list here. But I do own a legal one...
- ch25
- Top Poster
- Posts: 1680
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: President Harry 2 classic
Can you see incoming signals on smeter? Try external speaker first.
Most probably 2nd IF filter died. Pretty common in that junk.
Easy to check. Measure voltage on 455 filter output. Should be +1V to +1.8V
If not filter is faulty.
Most probably 2nd IF filter died. Pretty common in that junk.
Easy to check. Measure voltage on 455 filter output. Should be +1V to +1.8V
If not filter is faulty.
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- lambrettadave
- Veteran
- Posts: 2985
- Joined: 11 Apr 2011, 15:50
- Call Sign: TM455
- Location: sunderland
- Contact:
Re: President Harry 2 classic
Check your squelch control isn't pointing to ASC
CALL SIGN 26TM455 OPERATOR DAVE QTH SUNDERLAND
http://www.flickr.com/photos/88011785@N06/ for CB magazine.reviews
http://www.youtube.com/user/lambrettadave7 for some vids of my radios.
http://www.flickr.com/photos/88011785@N06/ for CB magazine.reviews
http://www.youtube.com/user/lambrettadave7 for some vids of my radios.
- Pluskat
- Regular
- Posts: 18
- Joined: 05 Feb 2016, 15:28
- Call Sign: 16op234
- Location: Belgium
Re: President Harry 2 classic
Speaker is fine,we get noise.
No incoming signals...
@ Chris,thanks for yor advice,i will check if filter.
No incoming signals...
@ Chris,thanks for yor advice,i will check if filter.