Hello everyone.
I decided to get back into radio and bought a superstar 360fm with a PB010AB board. it has a TA7222 audio out IC with a hole burnt in it.
That's not a problem but it has a few missing bits around the chip as well, I wonder in anyone could give me the values please?
C168, C169, C172, C173, R423, R424
Failing that, where could I find a hi-res circuit diagram please?
Thanks in advance
Andrew
superstar360fm pb010ab parts missing
-
- Regular
- Posts: 11
- Joined: 30 May 2022, 17:00
- Call Sign: M0IIQ
- Location: Bradford BD12
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: superstar360fm pb010ab parts missing
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
-
- Regular
- Posts: 11
- Joined: 30 May 2022, 17:00
- Call Sign: M0IIQ
- Location: Bradford BD12
Re: superstar360fm pb010ab parts missing
Thank you very much CH25
-
- Regular
- Posts: 11
- Joined: 30 May 2022, 17:00
- Call Sign: M0IIQ
- Location: Bradford BD12
Re: superstar360fm pb010ab parts missing
Hi CH25 and others, could anyone tell/show me where the little black wire that's soldered onto the TA7222 attaches to on the board please?
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: superstar360fm pb010ab parts missing
It is marked on Chassis Wiring Diagram (Page 6 / 7)
No worry, the same place both chassis version.
No worry, the same place both chassis version.
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
-
- Regular
- Posts: 11
- Joined: 30 May 2022, 17:00
- Call Sign: M0IIQ
- Location: Bradford BD12
Re: superstar360fm pb010ab parts missing
Hi Everyone.
With your help WE repaired it, works fine.
Next job is a refurb of my homebrew linear, I built it years ago, been hanging around on my "to-do" list after I repaired the radio. It's 3 of PL519's (valves ) in class AB1, needs 4w of drive for medium smoke, used to be good for 200w
With your help WE repaired it, works fine.
Next job is a refurb of my homebrew linear, I built it years ago, been hanging around on my "to-do" list after I repaired the radio. It's 3 of PL519's (valves ) in class AB1, needs 4w of drive for medium smoke, used to be good for 200w