Cybernet 1000

A forum for the discussion of matters of a technical nature. All such activities are undertaken at the readers discretion and own risk. If you don't know what you are doing, don't blame us if it all goes wrong!
Post Reply
Carlfox
Registered New User
Registered New User
Posts: 1
Joined: 16 Jan 2020, 08:46

Cybernet 1000

Post by Carlfox » 16 Jan 2020, 09:02

Hi guys just bought a cybernet beta 1000 , just fixed the tx. / rx fault by re tuning the vco now that part works well however its only pushing out 1w on full pwr mode so i tuned up the cans still max of 1 w on closer inspection there appears to be missing something directly at the right of the driver it has 2 holes can anyone help even with a pic of the back of the radio ? id love to get the old girl back on the road thanks in advance

User avatar
The Collector
Legend
Legend
Posts: 6053
Joined: 23 Jan 2010, 19:26
Location: Bristol-ish

Re: Cybernet 1000

Post by The Collector » 17 Jan 2020, 17:00

Does this help? (I personally know nothing about components/schematics etc)?:

http://radiowaves.awardspace.co.uk/Circ ... bernet.jpg

User avatar
Buick Mackane
Legend
Legend
Posts: 7580
Joined: 21 Aug 2012, 17:30
Location: A country called scotland

Re: Cybernet 1000

Post by Buick Mackane » 17 Jan 2020, 17:11

The Collector wrote:
17 Jan 2020, 17:00
Does this help? (I personally know nothing about components/schematics etc)?:

http://radiowaves.awardspace.co.uk/Circ ... bernet.jpg
That brings up an error page dave,


Whats the component number of the missing part ? C1 / R1 / L1 etc ?
I Was asked to QSL Via the Bureau, But the FBI Said i'll be prosecuted if i phone them again, :shock:

User avatar
The Collector
Legend
Legend
Posts: 6053
Joined: 23 Jan 2010, 19:26
Location: Bristol-ish

Re: Cybernet 1000

Post by The Collector » 17 Jan 2020, 20:04

Buick Mackane wrote:
17 Jan 2020, 17:11
The Collector wrote:
17 Jan 2020, 17:00
Does this help? (I personally know nothing about components/schematics etc)?:

http://radiowaves.awardspace.co.uk/Circ ... bernet.jpg
That brings up an error page dave,


Whats the component number of the missing part ? C1 / R1 / L1 etc ?
Strange...I clicked on the link on your reply amd it bought it straight up:
You do not have the required permissions to view the files attached to this post.

lbcomms
Super Member
Super Member
Posts: 347
Joined: 04 Oct 2015, 08:10
Location: Sydney, Australia

Re: Cybernet 1000

Post by lbcomms » 17 Jan 2020, 22:40

That site is set up so that you can't swipe the picture directly.

Go to: http://radiowaves.awardspace.co.uk/

Click on: AJP circuits

Click on: CB radio circuits

Click on: BETA 1000,2000,3000 Circuit

and you'll have your diagram...

Post Reply