PRESIDENT JACKSON 2!

Guest · Post by **Guest** » 24 Jun 2008, 20:20

simon,is there any news on whether the later models of jackson 2 will have the output fault fixed before leaving balaruc?

I know what the fault is, and what causes it. It is my belief that later models will not have it, BUT if it does then back to the supplier and then sent to Joel and Cam who will make the magic and the radio will work one more time.

And for the mod:

bottom cover off
left handside when front facing at you, small white wire (cut it)
move jumper to the other position

Gives you the exports, but only 4w till you make the power mod too

Post by **RANGERDX70** » 24 Jun 2008, 20:28

simonthewizard wrote:
simon,is there any news on whether the later models of jackson 2 will have the output fault fixed before leaving balaruc?
I know what the fault is, and what causes it. It is my belief that later models will not have it, BUT if it does then back to the supplier and then sent to Joel and Cam who will make the magic and the radio will work one more time.

And for the mod:

bottom cover off
left handside when front facing at you, small white wire (cut it)
move jumper to the other position

Gives you the exports, but only 4w till you make the power mod too

O right ? so i have to turn the power up on his radio when mode has been dune.

cheers for info

Post by **MARKASTERIX** » 14 Sep 2008, 00:10

Does anyone know which resistor limits the audio?? on Jackson II [-o<

Guest · Post by **Guest** » 14 Sep 2008, 05:25

Yes i know where it is, and its on the top of board. Hans is the man that knows 1000% and not me. But when replaced it makes around 2.4 - 2.8khz and not the legal 1.7

Guest · Post by **Guest** » 14 Sep 2008, 05:28

O right ? so i have to turn the power up on his radio when mode has been dune.

AM/FM maximum 15w
SSB MAX,MAX 20-25W and not more

http://www.servicedocs.com/zoek/download.asp?key=6747

328MIC001 · Post by **328MIC001** » 02 Oct 2008, 23:12

does anyone knows how to fix RX on SSB when signal is too strong? sounds real bad -deformedly
73deRocky

jazzsinger · Post by **jazzsinger** » 03 Oct 2008, 01:21

328MIC001 wrote:does anyone knows how to fix RX on SSB when signal is too strong? sounds real bad -deformedly
73deRocky

another jackson with agc time constant problems? did they not learn from the original jackson?a fault which is easily cured but was never done in the factory,severe denial seems to be the order of the day in fuyong town,shenzhen.about time they moved back to philippines or will they move to hanoi vietnam to cut costs even further?

Guest · Post by **Guest** » 03 Oct 2008, 04:24

does anyone knows how to fix RX on SSB when signal is too strong? sounds real bad

Take it to the dealer and let them fix it in France unless all modded then the warranty is void and lost. Not heard of this fault on the radio so far

Guest · Post by **Guest** » 03 Oct 2008, 07:02

Mine sounds absolutely fine on rx,even with ultra strong signals from a dx'er up the road from me........

YouTube · Post by **dxswe** » 08 Oct 2008, 18:29

Hallo.I wonder which pot is for ssb.
Best regards Jan

Guest · Post by **Guest** » 08 Oct 2008, 20:15

http://www.servicedocs.com/ARTIKELEN/12700237720001.JPG

Here you go, but no more power than 24w SSB

YouTube · Post by **dxswe** » 09 Oct 2008, 06:09

Is that possible to adjust RT202 i RU mode

Guest · Post by **Guest** » 09 Oct 2008, 06:21

The Mod is the one that was sent, to make a move anywhere else, thats upto you

YouTube · Post by **dxswe** » 09 Oct 2008, 17:29

Thanks for the answer.I have adjust the rt202 and the ssb power is little bit lower now.

I wonder which pot is for the FM devation

Best regards Jan

Guest · Post by **Guest** » 09 Oct 2008, 19:05

I wonder which pot is for the FM devation

limited by a resistor