I never really left really, just thought T 1 had died.
The "other" one now appears dead.
To re cap I'm in West Cornwall & hope to contribute where I can.
I find as expect you do that many data bases including OFCOM are very out of date.
Certainly the DMR trunks Cap + & T3 listed local to me are way out of date location wise.
I think large users are located a channel list & use them as they will.
This happens when channels are allocated to a site & there is an interferrence problem, so a frequency from another site is used to fix the problem.
Much of the Cap+ chans are going over to T3, the old 1327 channels also.
The T3 channels around 154 are mostly encoded when i have listened.
Lots of DMR 449.3125 449.4 449.475 analogue too
455.4875 & 453.525 Fm ground relay worth a listen too.
So is radio scanning dead... I don't think so !
All we need now is for a manufactuer to product a radio with decent DMR decode.
SDS200e & DV1 quite grim however the old Icom R7000 & DSDPlus
I have returned to the fold
-
- Regular
- Posts: 43
- Joined: 21 Jul 2013, 15:58
- Location: Cornwall
-
- Regular
- Posts: 22
- Joined: 05 Dec 2016, 22:21
Re: I have returned to the fold
Good to have you back.
Perhaps you might be able to help… Penzance Shopwatch, I can’t seem to ever get anything from them, ever. Would you know of their frequency and if so, would you mind posting or direct messaging?
I’m literally banging my head against a brick wall as everything I find, every search I make, the frequencies just never modulate.
Anything/ help you might be able to pass for Penzance specifically, I’d be very grateful for.
Thank you.
SDS100, dsd, DSDPlus, Motorbo.
Perhaps you might be able to help… Penzance Shopwatch, I can’t seem to ever get anything from them, ever. Would you know of their frequency and if so, would you mind posting or direct messaging?
I’m literally banging my head against a brick wall as everything I find, every search I make, the frequencies just never modulate.
Anything/ help you might be able to pass for Penzance specifically, I’d be very grateful for.
Thank you.
SDS100, dsd, DSDPlus, Motorbo.
-
- Regular
- Posts: 43
- Joined: 21 Jul 2013, 15:58
- Location: Cornwall
Re: I have returned to the fold
Shop watch gone see pm Cheers
-
- Regular
- Posts: 43
- Joined: 21 Jul 2013, 15:58
- Location: Cornwall
Re: I have returned to the fold
Also SDS200 & expect 100 Firmware updrade gives dPMR
http://www.uniden.co.jp/english/product ... _03_00.zip
http://www.uniden.co.jp/english/product ... _03_00.zip
-
- Regular
- Posts: 22
- Joined: 05 Dec 2016, 22:21