I have the Trx1 works well.
449 UK simple irritating noise?
- Werthers
- Radio Addict
- Posts: 839
- Joined: 01 Sep 2019, 20:19
- Location: Essex
Re: 449 UK simple irritating noise?
I'm getting the same noise on 449.400 MHz with analog transmissions going over the top of it.
-
- Regular
- Posts: 11
- Joined: 13 May 2021, 09:46
Re: 449 UK simple irritating noise?
Just started using my analogue scanner an i'm picking up transmissions on 449.400 MHz but with the whooshing sounds behind it I can't make out what is being said, I know the word 'Warehouse' was mentioned but that's about it. For someone reason my TRX-1 is refusing to pick it up...
-
- Regular
- Posts: 61
- Joined: 01 May 2021, 12:22
- Contact:
Re: 449 UK simple irritating noise?
I found out you can scan ranges using the opengd77 firmware, if you hold the up arrow for long whilst in VFO mode you are presented by a frequency range in which you can set to scan and clicking the up arrow again commences the scan.
I have also found the sweep display useful activated in VFO mode by holding long press the hash key. It mimics an SDR/panadapter display by sweeping through whilst showing signal strength.
https://github.com/LibreDMR/OpenGD77_Us ... sweep-scan
-
-
- Regular
- Posts: 46
- Joined: 29 Dec 2020, 12:34
- Call Sign: 26TM7373
- Location: Great Yarmouth
Re: 449 UK simple irritating noise?
thanks, opengd77 is really nice f/w glad they worked out the DMCA problems.
SDRPlay RSP1A + CrossCountryWireless Loop
Icom IC7410 + thunderpole boomerang
Retevis RT90 (opengd77) + Diamond x50
Yupiteru MVT-9000MKII, Baofeng DM-1801 (with opengd77)
Icom IC7410 + thunderpole boomerang
Retevis RT90 (opengd77) + Diamond x50
Yupiteru MVT-9000MKII, Baofeng DM-1801 (with opengd77)
-
- Top Poster
- Posts: 1089
- Joined: 10 Jun 2007, 22:41
- Call Sign: G4RMT
- Location: North East Suffolk
- Contact:
Re: 449 UK simple irritating noise?
Probably Nexedge - my radios make that strange chuffing noise.