Dummy Load High SWR?
- Dave C
- Regular
- Posts: 39
- Joined: 12 May 2020, 10:46
- Call Sign: 27PL259
- Location: Staffordshire
- Contact:
Dummy Load High SWR?
Hi All,
I've just knocked together a 50 Ohm Dummy Load with 3 x 150 Ohm resistors in parallel as per my pic, it measures 49.8 Ohm so pretty much smack on tolerance. The patch lead that I used is about 12" long (30 cms), but when I key up the mic the SWR reads at about 1:7, does anyone have any suggestion where I can go from here to get it down please? Also tried and alternative patch lead to rule out that
Thanks in advance..
Dave
I've just knocked together a 50 Ohm Dummy Load with 3 x 150 Ohm resistors in parallel as per my pic, it measures 49.8 Ohm so pretty much smack on tolerance. The patch lead that I used is about 12" long (30 cms), but when I key up the mic the SWR reads at about 1:7, does anyone have any suggestion where I can go from here to get it down please? Also tried and alternative patch lead to rule out that
Thanks in advance..
Dave
You do not have the required permissions to view the files attached to this post.
Last edited by Dave C on 22 May 2020, 14:07, edited 1 time in total.
Life is like a box of chocolates.... Usually empty when I get there....
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Dummy Load High SWR?
I can't see photos, but aren't they wirewound?
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
-
- Top Poster
- Posts: 1346
- Joined: 19 Feb 2008, 00:37
Re: Dummy Load High SWR?
as above, are they inductive wirewound resistors?, or is the patch lead 75ohm coax.
W8JI
"An antenna with a poor ground using few radials cannot have a support mast grounded to the radial common point (at least it shouldn't if designed properly) There is no exception to this!
"An antenna with a poor ground using few radials cannot have a support mast grounded to the radial common point (at least it shouldn't if designed properly) There is no exception to this!
- Dave C
- Regular
- Posts: 39
- Joined: 12 May 2020, 10:46
- Call Sign: 27PL259
- Location: Staffordshire
- Contact:
Re: Dummy Load High SWR?
Not sure I've posted the pictures properly, can you see these now Chris?
WH50 150R 5% is what they are also patch id 50 Ohm..
Dave
Life is like a box of chocolates.... Usually empty when I get there....
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Dummy Load High SWR?
404 now.
Attach photos to your first post.
Attach photos to your first post.
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- Dave C
- Regular
- Posts: 39
- Joined: 12 May 2020, 10:46
- Call Sign: 27PL259
- Location: Staffordshire
- Contact:
Re: Dummy Load High SWR?
Picture now on post 1...
Life is like a box of chocolates.... Usually empty when I get there....
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Dummy Load High SWR?
Wrong type of resistors. That's a reason.
You need carbon type, not wirewound (inductive).
Like: http://qso365.co.uk/2011/08/building-a-dummy-load/
Or: https://www.ebay.com/itm/A3RMK6-RFP-Dum ... 3654436218
You need carbon type, not wirewound (inductive).
Like: http://qso365.co.uk/2011/08/building-a-dummy-load/
Or: https://www.ebay.com/itm/A3RMK6-RFP-Dum ... 3654436218
Last edited by ch25 on 22 May 2020, 15:31, edited 1 time in total.
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- Dave C
- Regular
- Posts: 39
- Joined: 12 May 2020, 10:46
- Call Sign: 27PL259
- Location: Staffordshire
- Contact:
Re: Dummy Load High SWR?
Took the inspiration from he used inductive resistors, are they NOT wire wounds?
Life is like a box of chocolates.... Usually empty when I get there....
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Dummy Load High SWR?
YT is full of shiĦy advices. You just found one
Buy that resistor https://www.ebay.co.uk/itm/100w-50ohm-D ... SwX9Bc-hYF or https://www.ebay.co.uk/itm/RF-terminati ... Sw0~pcEz~V or similar.
Chris
Buy that resistor https://www.ebay.co.uk/itm/100w-50ohm-D ... SwX9Bc-hYF or https://www.ebay.co.uk/itm/RF-terminati ... Sw0~pcEz~V or similar.
Chris
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
-
- Top Poster
- Posts: 1346
- Joined: 19 Feb 2008, 00:37
Re: Dummy Load High SWR?
The video is using dale none inductive resistors, they have two windings in opposite directions to cancel inductance, it sorta works at low frequencies,
your welwyns are single winding inductive resistors, neither type are suitable for rf dummyload at higher frequencies,
you may be able to cancell most of it out with a parallel capacitor but that aint a rf dummyload anymore, its a very lossy tuned circuit,
good loads have flat vswr over a very wide bandwidth, anything else can screw with your rf power measurements if the transmitter/amplifier is not as clean as a whistle on harmonics,
easy option that will work good enough is one of the flat pack DC-daylight resistors ch25 posted link to & stick it in an old cb amplifier heatsink,
don't use skinny wires, use flat wide strap or braid or copper clad board for wiring.
your welwyns are single winding inductive resistors, neither type are suitable for rf dummyload at higher frequencies,
you may be able to cancell most of it out with a parallel capacitor but that aint a rf dummyload anymore, its a very lossy tuned circuit,
good loads have flat vswr over a very wide bandwidth, anything else can screw with your rf power measurements if the transmitter/amplifier is not as clean as a whistle on harmonics,
easy option that will work good enough is one of the flat pack DC-daylight resistors ch25 posted link to & stick it in an old cb amplifier heatsink,
don't use skinny wires, use flat wide strap or braid or copper clad board for wiring.
W8JI
"An antenna with a poor ground using few radials cannot have a support mast grounded to the radial common point (at least it shouldn't if designed properly) There is no exception to this!
"An antenna with a poor ground using few radials cannot have a support mast grounded to the radial common point (at least it shouldn't if designed properly) There is no exception to this!
- Dave C
- Regular
- Posts: 39
- Joined: 12 May 2020, 10:46
- Call Sign: 27PL259
- Location: Staffordshire
- Contact:
Re: Dummy Load High SWR?
Cheers gentlemen for your input, I'll get onto making some alterations....
Best Regards
Dave
Best Regards
Dave
Life is like a box of chocolates.... Usually empty when I get there....
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.
Rigs: Major M588 AM FM SSB (Std), President Grant II Premium (Std), Midland Alan 78 Plus (Std), Lowe TX 40 (Std).
Twigs: Antron 99 (Std), K40 Mag, Firestick 4', Cherokee Dial A Match 4', Sirio 1000 PL Mag.