Transmission1

Hi guys can anyone help me

I bought a non working 3100 uk Homebase also made by Jesan

Inside I have 4 wires that have come off the board

1 yellow wire which the other end is soldered to the top of a tuning can

1 thicker than the rest black wire which comes from underneath the board

1 white wire that comes from the rear of the radio next to the coax connector and r1

1 purple wire which is the 2nd along comes off the eprom chip

Any help appreciated

Alright?
You thought I had one of these but it was a Jesan lol.
I like the analog meters better myself. Have you fixed it yet?

The owner manual is on the net

I took some photos of mine in this thread

viewtopic.php?f=29&t=20140&p=171048#p171048

Well the progress is I’ve got it to light up scan etc but I still need to know 100% where those wires I mentioned earlier go ?

I saw your post pics but unfortunately it isn’t clear enough to be sure

If somone can help me I recon the radio will work ?

Thanks

I am on holiday at the moment but when I get back I will take some pictures.
On my laptop I have a copy of the manual which might be of interest

I really appreciate that lambretta Dave !!!


Thank you

Looks like I'll be talking to you on it soon!

Unknown wrote: ↑13 Aug 2019, 13:48 Looks like I'll be talking to you on it soon!

Hope so !!

Hello









@+
Claude

14CS06 wrote: ↑15 Aug 2019, 08:16 Hello









@+
Claude

Thanks Claude
Seen this before
Unfortunately these pics don’t show clearly the wires I need to repair ...

Thanks for trying

So frustrating as I only need to connect a few wires and maybe it will work