president silver color

[dt307]

Found a excellent match

WP_20160212_11_03_21_Pro.jpg

Not finished yet just getting the base coat down

WP_20160212_11_03_40_Pro.jpg

[Admiral]

Your thumb has come up nice.

[beamer320i]

It's the low budget remake of Goldfinger - 'Silverthumb' I'll get me coat

Anyway, looks like a good match - Ford Moondust Silver, thanks for sharing

[dt307]

Thanks guys lol was a quick blast for a match
Been a nice day in south wales so rubbed it right back primed,base coat done
Just lacquer left and a graphic and she be mint

WP_20160212_12_06_58_Pro.jpg

[dt307]

Thing is my m8 a pro sprayer but I wont have the

I did that

[The Collector]

Nice
I've done that many a time with the old finger painting. Red's the worst as it looks like you've been wearing nail polish if you don't get it off with a bit of thinners..or if it's black, people might think you're a Goth lol.
I now use a Nitrile/Latex glove on my 'holding hand'. Always throw them away afterwards though as the dried paint can flake off all over stuff if it's reused later on.

[slamjam]

I found the silver paint they do in pound land is also a very good match for president. Moondust silver is metallic colour whereas the president colour is Matt finish

[dt307]

I found the silver paint they do in pound land is also a very good match for president. Moondust silver is metallic colour whereas the president colour is Matt finish

will have a look and thanks for the info,the one i have is far from matt in the light you could see the metallic in it
but the madison i have is a matt flat plain finish

been working on the graphic tonight as to what i want not to shabby i think
(THE BASIC LAYOUT I BORROWED KINDA)

GRANT FINISH.jpg

[cb4ever104]

I'd do the +10khz mod on it and mark it as such on the BRITE/DIM switch inlay . Just my 10c

[slamjam]

This is the jackson I did a while ago with it. You can't tell it's been painted the match is so close.

[Stronty]

This is the jackson I did a while ago with it. You can't tell it's been painted the match is so close.

Hi Slamjam, Interested in how that turned out for you, the Pic seems to be gone

I have a nice Silver Jackson, front of face is very good but some very slight wear on the corner edges on top and sides. So I would mask the front and respray the rest after a lite rub down.

Did you lacquer it when finished?

love to see some pics if you can

[cb4ever104]

I'd do the +10khz mod on it and mark it as such on the BRITE/DIM switch inlay . Just my 10c

I've just re-read my post and realised what a turkey I am ! It would have been a good idea if you were painting the black plastic inlay as well

Sammy (a danger to everyone with a paint brush in his hands)

[dt307]

Had the graphics from ray and they are miles better than what I did lol
Well that's two of the grants done but they bit dusty now

WP_20160301_11_37_11_Pro.jpg

[zephyr]

That's it I've made my mind up after seeing what you've done, I'll just have to get a new decal from Ray.
At least I only need one as my other Grant I have had no front when I bought it so I fitted a Cobra front and channel switch.
The chance of finding a good front are about zero.

[astrolab]

Hi,
I have some crystal stickers for Président Grant realy good ( pictures on demand)
Regards