Chasing ghosts mt6000e
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
One week later update: still can't find the RSS. Not funky, lol.
- Metradio
- Radio Addict
- Posts: 605
- Joined: 28 Apr 2016, 19:10
- Call Sign: G7HID
- Location: Box 500, Slough UK
Re: Chasing ghosts mt6000e
Sorry to say they are classed as old classics now, 15 - 20 years ago they were very popular and could be got at bargain prices, but radio and computer technology has moved on.. I got rid of mine when my 486 DOS programming computer gave up the ghost... Interest in the MT6000 and HT600 had waned to nil so I decided not to hang onto my old programming and servicing software and the sites where the software had been uploaded to just in case someone was interested have closed down or faded away..
It was good while it lasted..
Mike
It was good while it lasted..
Mike
Connect Systems CS750 and CS800, Hytera PD-365, Motorola DP4600.
Raspberry Pi 2 and DV4Mini HotSpot.
AOR AR-DV1 Digital Voice Receiver / eSPY on ARD V1.
Whistler WS1088 / TRX-1 / Whistler Q / UBCD3600XLT / WTR Browser.
Raspberry Pi 2 and DV4Mini HotSpot.
AOR AR-DV1 Digital Voice Receiver / eSPY on ARD V1.
Whistler WS1088 / TRX-1 / Whistler Q / UBCD3600XLT / WTR Browser.
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
I agree with you - as I stated, it was (it still is?) more of a fun project. Of course both worlds moved and are moving on - no questions asked (hello SDRs, hello accessible digital, hello Pi and daughterboards etc). I would ditch them if they were dead as a hardware - but they are not (including the batteries). Yes, probably not very useful, but good enough for some weekend fun. Hoped that somebody around might still have the old software somewhere "archived". If not, well, bad luck.
Side note & fun fact: two channels of the three (in total) that there were programmed on are either digital or modem transmissions, by the way they sound.
Ah, on the matter of sites - do you know some that had it? Might worth a shot on the web archive service.
Thanks!
Side note & fun fact: two channels of the three (in total) that there were programmed on are either digital or modem transmissions, by the way they sound.
Ah, on the matter of sites - do you know some that had it? Might worth a shot on the web archive service.
Thanks!
- Metradio
- Radio Addict
- Posts: 605
- Joined: 28 Apr 2016, 19:10
- Call Sign: G7HID
- Location: Box 500, Slough UK
Re: Chasing ghosts mt6000e
Some sets were capable of scrambling, they were marked on the case front 'MASC'...
One site with the files was the HT600E Yahoo group.
Mike
One site with the files was the HT600E Yahoo group.
Mike
Connect Systems CS750 and CS800, Hytera PD-365, Motorola DP4600.
Raspberry Pi 2 and DV4Mini HotSpot.
AOR AR-DV1 Digital Voice Receiver / eSPY on ARD V1.
Whistler WS1088 / TRX-1 / Whistler Q / UBCD3600XLT / WTR Browser.
Raspberry Pi 2 and DV4Mini HotSpot.
AOR AR-DV1 Digital Voice Receiver / eSPY on ARD V1.
Whistler WS1088 / TRX-1 / Whistler Q / UBCD3600XLT / WTR Browser.
-
- Super Member
- Posts: 355
- Joined: 28 Jun 2011, 12:18
- Location: Manchester , Uk
Re: Chasing ghosts mt6000e
Sorry for the late reply but I've been really busy ' and I still have the file luckily so I will create a Dropbox link for you mate
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
Ahahaha, good news! No worries - thank you!
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
Quick update: with the help of the software kindly provided by moj and my retro Acer laptop + cacheoff.com scripts, I was able to read the codeplug (I think that's how it's called) and validate it against the settings/frequencies the radios are programmed on. I'll check probably tomorrow if I can modify them and write them back. Nicey - thanks again, moj! Cable used is a cheap RS232 to whatever the Motorola connector it's called - no RIB.
-
- Super Member
- Posts: 355
- Joined: 28 Jun 2011, 12:18
- Location: Manchester , Uk
Re: Chasing ghosts mt6000e
Your welcome mate ' glad you finally got sorted enjoy !
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
So, writing works - managed to program a PMR frequency, just for fun. Now I need to check something - either config/software or something else: speaker does not close / SQL not working after receiving and ending transmission. It transmits fine, but remains opened (?this is how it's called) even after the receiving has ended.
-
- Super Member
- Posts: 355
- Joined: 28 Jun 2011, 12:18
- Location: Manchester , Uk
Re: Chasing ghosts mt6000e
Did you add the ctcss and dcs squelch
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
Aaaah... Nope? Those are foreign language to me. I used only the PMR frequency to TX (RX on MT6000), without any additional codes...
-
- Super Member
- Posts: 355
- Joined: 28 Jun 2011, 12:18
- Location: Manchester , Uk
Re: Chasing ghosts mt6000e
I will check my codeplug i made in a bit or send you a link to it if its easier
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
That would be interesting - if you can spare the time. I'm sure I'm doing something wrong, setting wise, since if I remove the antenna from the HT (meaning, probably, less parasitic stuff / noise), it opens properly on RX and closes after finishing. So it seems like it opens on RX and remains opened, due to some noise?!
- Metradio
- Radio Addict
- Posts: 605
- Joined: 28 Apr 2016, 19:10
- Call Sign: G7HID
- Location: Box 500, Slough UK
Re: Chasing ghosts mt6000e
Squelch level is set per channel in the RSS..
Mike
Mike
Connect Systems CS750 and CS800, Hytera PD-365, Motorola DP4600.
Raspberry Pi 2 and DV4Mini HotSpot.
AOR AR-DV1 Digital Voice Receiver / eSPY on ARD V1.
Whistler WS1088 / TRX-1 / Whistler Q / UBCD3600XLT / WTR Browser.
Raspberry Pi 2 and DV4Mini HotSpot.
AOR AR-DV1 Digital Voice Receiver / eSPY on ARD V1.
Whistler WS1088 / TRX-1 / Whistler Q / UBCD3600XLT / WTR Browser.
-
- Regular
- Posts: 13
- Joined: 09 Jan 2022, 18:24
Re: Chasing ghosts mt6000e
Somehow, I constantly fail to spot that option/setting...