Opek -hcs 100 inner rod measurements
- prettypolly
- Top Poster
- Posts: 1021
- Joined: 09 Jan 2013, 01:57
- Call Sign: 26FB185
Opek -hcs 100 inner rod measurements
Opek-hcs 100 inner rod measurements I'm looking to see if any body has a bang on measurement for the named antennas inner rod to get a decent swr between 27.415 and 27.555 please around 27.465 ,I've been trying for 3 days now up and down the the flipping ladders it's 1.3 low down on the ground but when we raise it the swr goes lower on the lower band when its up in the air but it's ok on the ground or 10 feet off the ground
- ch25
- Top Poster
- Posts: 1675
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: Opek -hcs 100 inner rod measurements
Pretty common with endfed antennas, where coax or mast act as counterpoise.
Mount it properly, I wrote some time ago in other thread how it should be done.
Mount it properly, I wrote some time ago in other thread how it should be done.
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- prettypolly
- Top Poster
- Posts: 1021
- Joined: 09 Jan 2013, 01:57
- Call Sign: 26FB185
Re: Opek -hcs 100 inner rod measurements
Got it sorted needed a better ground by using a fresh clean aluminium pole
-
- Registered New User
- Posts: 1
- Joined: 30 Oct 2021, 14:55
Re: Opek -hcs 100 inner rod measurements
What measurements did you use for the inner rod please just bought one myself.