Got a slight problem with my mk1 lincoln.
When transmitting on am.fm.ssb i get feedback coming through the speaker. The radio is putting out 10 watts am.fm and 21 watts ssb.
Does anyone have a solution to resolve this problem.
Thanks in advance.
President lincoln mk1 tx audio coming through speaker
-
- Super Member
- Posts: 231
- Joined: 13 Mar 2015, 19:28
- Call Sign: 163TM2803
- Location: Cwmbran, South Wales.
- ch25
- Top Poster
- Posts: 1679
- Joined: 03 Dec 2016, 11:07
- Call Sign: Lemmy
- Location: Poland
Re: President lincoln mk1 tx audio coming through speaker
WE ARE MOTÖRHEAD, AND WE PLAY ROCK N' ROLL
You can't have too many antennas...
You can't have too many antennas...
- astradyne
- Moderator
- Posts: 11031
- Joined: 14 Jun 2010, 09:28
- Location: Dunny On The Wolds
- Contact:
Re: President lincoln mk1 tx audio coming through speaker
The first run of the 2830's and Lincoln's all had this issue. Not sure if it was an intentional function or a manufacturing/design issue, but by the time the Philippines made radio's came out the problem of TX audio coming through the speaker had been resolved.
Never, ever, ever....bloody anything ever!
Far too many radio's to list here. But I do own a legal one...
Far too many radio's to list here. But I do own a legal one...
- 163TM847
- Veteran
- Posts: 4145
- Joined: 16 Mar 2009, 19:30
- Location: S.Wales
Re: President lincoln mk1 tx audio coming through speaker
I have done the 10k resistor and 1n4148 diode in series to pin 6 of the audio amp many times and it works fine.
You do not have the required permissions to view the files attached to this post.
-
- Super Member
- Posts: 231
- Joined: 13 Mar 2015, 19:28
- Call Sign: 163TM2803
- Location: Cwmbran, South Wales.
Re: President lincoln mk1 tx audio coming through speaker
Thanks for all the replies. Waiting for parts to arrive will post results.
-
- Super Member
- Posts: 231
- Joined: 13 Mar 2015, 19:28
- Call Sign: 163TM2803
- Location: Cwmbran, South Wales.
Re: President lincoln mk1 tx audio coming through speaker
Just finished mod 3. Tested and it works perfectly.
Thanks all for imfo.
Thanks all for imfo.