Colt Excalibur SSB with ptbm059cox Rogerbeep
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Colt Excalibur SSB with ptbm059cox Rogerbeep
Hello, I have a question!
How to disable the Roger Beep on the device?
It is always switched on!
Maybe a capacitor remove as with the Hy Gain?
best Regards
Bernd
How to disable the Roger Beep on the device?
It is always switched on!
Maybe a capacitor remove as with the Hy Gain?
best Regards
Bernd
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
Does no one have an idea?
- Mitch
- Radio Addict
- Posts: 597
- Joined: 02 Nov 2012, 21:26
- Call Sign: M1TCH
- Location: Leicestershire UK
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
The 059 board doesn't have a bleep, it must be an addon board. It will usually be one with, or connected to, a small relay and removing the 9v feed from it should disable it. Best I can do without pics.
The perfect face for radio.
- 163TM847
- Veteran
- Posts: 4145
- Joined: 16 Mar 2009, 19:30
- Location: S.Wales
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
I have never heard of a colt excalibur [silver fronted] with an 059 board all the ones i have seen are PTBM121 which have the Hygain beep
- highvoltageuk
- Regular
- Posts: 72
- Joined: 17 Apr 2016, 21:08
- Call Sign: GM7TMW
- Location: West Coast, Scotland
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
Doesn't This radio have the Nato bleep PCMA001S
Kenwood TS-2000
Colt 1600DX[/color]
Colt 1600DX[/color]
- dt307
- Top Poster
- Posts: 1250
- Joined: 05 Sep 2014, 16:15
- Call Sign: 163dt307
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
Yes lots of people on here know how to do itbernado wrote:Does no one have an idea?
Don't mean to be funny have a bit of respect for all the helpers on here.they don't just sit on the forum waiting to serve you.
Strange you can't even wait half a day for some one to reply before you got impatient......and yet you don't reply to Nick and mich and yet more time has passed .
Let's get back on track
As Nick says they normally a 121 board
Please post 2 good pictures on the inside all the radio not just the board
One component side
One solder side
From this we can tell exactly what board and or sub board and help you further
163dt307-chris
“I fear the day that technology will surpass our human interaction. The world will have a generation of idiots.”
― Albert Einstein
“I fear the day that technology will surpass our human interaction. The world will have a generation of idiots.”
― Albert Einstein
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
OK i make a Photo from the Colt Excalibur
best Regards
Bernd
best Regards
Bernd
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
The following boards are installed!
PTBM059COC
PTZZ053AOX
PTSW072COX
PTOS006AOX
Maybe this helps?
PTBM059COC
PTZZ053AOX
PTSW072COX
PTOS006AOX
Maybe this helps?
- Mitch
- Radio Addict
- Posts: 597
- Joined: 02 Nov 2012, 21:26
- Call Sign: M1TCH
- Location: Leicestershire UK
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
The PTZZ053AOX is the bleep board, same as Formac 120 with two small relays, so you could take out a cap or remove the 9v (BAS) feed. I've got the same board in my Concorde Mk1 for the CW but it's wired differently and I haven't found a circuit diagram yet.
The perfect face for radio.
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
OK thank you for this Information ,i will lock later
- Mitch
- Radio Addict
- Posts: 597
- Joined: 02 Nov 2012, 21:26
- Call Sign: M1TCH
- Location: Leicestershire UK
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
I've just found a Formac diagram and it's Pin 5 on the 053 board, looks like TX volts (BT) rather than 9v so I'm a bit rusty, it's been a while. Disconnect Pin 5 and it should stop the beep and delay but still RX/TX properly. Or put it on a switch.
The perfect face for radio.
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
Ok i have found it!
2 caps 1 for the Beep and 1 for the Delay!
Thanks for all!
best Regards
Bernd
2 caps 1 for the Beep and 1 for the Delay!
Thanks for all!
best Regards
Bernd
- dt307
- Top Poster
- Posts: 1250
- Joined: 05 Sep 2014, 16:15
- Call Sign: 163dt307
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
On the bleep board switch any leg of c6 should do it
Bit late as i think you sorted it now
Bit late as i think you sorted it now
163dt307-chris
“I fear the day that technology will surpass our human interaction. The world will have a generation of idiots.”
― Albert Einstein
“I fear the day that technology will surpass our human interaction. The world will have a generation of idiots.”
― Albert Einstein
-
- Regular
- Posts: 45
- Joined: 18 Feb 2017, 13:05
- Call Sign: 56la422
- Location: Finland
- Contact:
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
Hi.
I have 2 diferrent Excaliburs.
PTBM058 am/ssb 40ch board and PTBM131 am/fm/ssb 160ch board.
I have 2 diferrent Excaliburs.
PTBM058 am/ssb 40ch board and PTBM131 am/fm/ssb 160ch board.
Paljon pilalle tinailtuja koneita.
Mobile. Ham concorde3, Megawatt 4000,Zetagi B550p.
Home. Colt Excalibur SSB , 2el Quad, Diy ldmos amp 1.6kw pep.
Mobile. Ham concorde3, Megawatt 4000,Zetagi B550p.
Home. Colt Excalibur SSB , 2el Quad, Diy ldmos amp 1.6kw pep.
-
- Regular
- Posts: 31
- Joined: 05 Nov 2013, 18:08
Re: Colt Excalibur SSB with ptbm059cox Rogerbeep
Yes many boards were installed!