Anytone 5555 v5 no receive signal on meter ?

A forum for the discussion of matters of a technical nature. All such activities are undertaken at the readers discretion and own risk. If you don't know what you are doing, don't blame us if it all goes wrong!
Post Reply
User avatar
WARLOCK
Top Poster
Top Poster
Posts: 1414
Joined: 04 Jun 2008, 08:27
Call Sign: 26TM134
Location: cambridgeshire

Anytone 5555 v5 no receive signal on meter ?

Post by WARLOCK »

i have a anytone 5555 that dose not show the incoming signal on the meter it shows the swr on the meter when i transmit ? any thoughts please
Top
108EH002
Top Poster
Top Poster
Posts: 1933
Joined: 13 Mar 2013, 22:23

Re: Anytone 5555 v5 no receive signal on meter ?

Post by 108EH002 »

Read the manual online if you don't have one,or press func for a few seconds until the screen changes to the built in menu and continue to press func until you see indic on display,then change to s/rf using the channel change ,and after a few seconds it will revert back to normal/what you want.

If in doubt it is on utube ;)
Plenty are talking worldwide on 27.555 usb,
Some are too far up their own @rse to admit it,
Many happen to know otherwise dx-ing test free,
Showing a complete lack of respect for the law.

27.555 Usb
Top
User avatar
delboyonline
Top Poster
Top Poster
Posts: 1239
Joined: 04 Oct 2007, 20:40

Re: Anytone 5555 v5 no receive signal on meter ?

Post by delboyonline »

Press the button marked SWR to turn the swr reading on and off.
Top
Post Reply

Return to “CB & 11m Multi-Mode Modification & Repair”