Transmission1

Hi guys i have said radio that is mid hi double hi but i would love to get the channel read out to say 12 instead of the 52 when on the hi band..i have done this mod years ago but simply cant remember what i did..i know its only 1 wire i nedd to unsolder from the top of the channelselector board and solder it to another point on the board but like i say dont remember where thanks guys for any help.

Take the wire off were the red arrow is and reconnect it to were the yellow arrow is, there is already a wire were the yellow arrow is, leave it connected. see photo

Thanks very much for the image J.R. Top bloke.