Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
A forum for the discussion of matters of a technical nature. All such activities are undertaken at the readers discretion and own risk. If you don't know what you are doing, don't blame us if it all goes wrong!
Phuture wrote: ↑21 Dec 2018, 19:09
The amp settings provide a slightly higher voltage, but only by about 0.2V and 0.6V respectively.
If that's 0.9V then that's not right . The transistor should just switch on with a little base current on SSB . If you're doing it using voltage then I usually disconnect one transistor at a time and set them individually . That way you'll also locate any bias issues , if you have them .
Sammy
30TM060 Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
