wire of my alan 87i

[listner132]

Here i have posted a link to a small problem i have..in the pic i have the same problem with my radio one end of the white/grey wire is not connected to anywere please can anyone help as to were it might go ?

http://obrazki.elektroda.pl/2109212700_1360497571.jpg

[beamer320i]

What's the problem with the radio?

[listner132]

Dont think there is one... i would just like to know were this wire should be connected as it seem odd that it is off.

[cb4ever104]

Does the SWR meter work ? I remember working on a swr related fault on a 3900 and there's a track that runs all the way from the back of the radio to the JXXX connector at the front . Might be for that . I'm sure Claude will have a picture kicking about somewhere .

Sammy

[listner132]

yes mate the swr meter is working fine.

thanks hope someone has a pic.

[14CS06]

Hello

On my CRT GALAXY NEPTUNE



On my SS 3900 HP



On a pic of Alan 87



@+
Claude

[listner132]

thanks very very much for taking the time to post up these pics..it looks like it is not connected to anything on the last pic you shared..maybe it is suppose to be off...seems odd tho.

[14CS06]

Hello

On my CRT GALAXY NEPTUNE



On my SS 3900 HP



On a pic of Alan 87



@+
Claude

Hello

On Nevada Coppa



@+
Claude

[listner132]

thanks Claude but please can you tell me if the black wire is soldered to the board ?

[14CS06]

thanks Claude but please can you tell me if the black wire is soldered to the board ?

Hello

The black wire is not soldered to the board on this pic



@+
Claude

[ch25]

That white wire suppose to work as power adjust on SSB, but it ruins SSB signal. First thing is to remove that when you open radio.
Chris

[cb4ever104]

That white wire suppose to work as power adjust on SSB, but it ruins SSB signal. First thing is to remove that when you open radio.
Chris

Don't think I've ever seen adjustable SSB power on an EPT36001XX board ? Only AM/FM .

Sammy

[ch25]

That wire does that. Since ages

[cb4ever104]

I'm not home , so I can't check any of my 14B boards , but I've never seen it before . So the radios that have the cable have variable SSB power , but no variable AM/FM power ? Very weird .

[30lom50]

Midland alan 87 unwelded mall cable with protective sheath