Uniden 100 stuck in tx
Uniden 100 stuck in tx
Hi there anyone shed some light on what this could be ? I was given this radio a few years back and it's stuck in tx also the meter lamp isn't working not sure if that is anything to do with it ? It's nothing to do with the mic as it does it without a microphone plugged in.
- sickboy
- Radio Addict
- Posts: 610
- Joined: 09 May 2016, 23:07
- Location: Scotland
Re: Uniden 100 stuck in tx
A quick search on here threw this up, it might help?
and another one..TX lights stuck on
Weaker signals cant be heard. Replace TR17 and TR19 (middle of PCB)
Transmitting without mic
Replace TR17 Transistor
Embrace your inner muppet !
- Buick Mackane
- Moderator
- Posts: 9633
- Joined: 21 Aug 2012, 17:30
- Location: A citizen of legoland
Re: Uniden 100 stuck in tx
Another cause could be a shorted cap on the mic socket
I Am the great cornholio are you threatening me ?
Re: Uniden 100 stuck in tx
Fixed now thanks. Anyone know where i can buy a replacement meter ?
-
- Top Poster
- Posts: 1415
- Joined: 10 Jun 2016, 12:35
- Call Sign: 26AT239
- Location: Democratic Republic of Dartmoor
Re: Uniden 100 stuck in tx
Put up a picture of the meter, I've got a bagful of CB signal meters there might be one amongst them.
- ghost123uk
- Radio Addict
- Posts: 758
- Joined: 19 Aug 2012, 13:46
- Call Sign: 26TM953
- Location: S. Cheshire
Re: Uniden 100 stuck in tx
So what was it then?Classic wrote:Fixed now thanks.
John, on the S. Cheshire / N. Shropshire border. 26TM953 / muppet handle "Grey ghost"
Don't just monitor, key up and talk, otherwise everyone thinks no one else is out there !!!
Don't just monitor, key up and talk, otherwise everyone thinks no one else is out there !!!
- ghost123uk
- Radio Addict
- Posts: 758
- Joined: 19 Aug 2012, 13:46
- Call Sign: 26TM953
- Location: S. Cheshire
Re: Uniden 100 stuck in tx
Classic wrote:Fixed now thanks.
So what was it then?
John, on the S. Cheshire / N. Shropshire border. 26TM953 / muppet handle "Grey ghost"
Don't just monitor, key up and talk, otherwise everyone thinks no one else is out there !!!
Don't just monitor, key up and talk, otherwise everyone thinks no one else is out there !!!
Re: Uniden 100 stuck in tx
It was tr17,i replaced it years again but forgot, then powered the rig up and it was working.ghost123uk wrote:Classic wrote:Fixed now thanks.
So what was it then?
- Mudslinger
- Legend
- Posts: 7491
- Joined: 28 Jul 2010, 07:11
- Location: Oxfordshire
Re: Uniden 100 stuck in tx
The signal meter on these is the upside down type where the needle comes up from underneath the meter, and they can be hard to find.
Needs to come from another Uniden 100 or an Audioline 340 I think. I cannot think of any other radios which use them off of the top of my head.
Needs to come from another Uniden 100 or an Audioline 340 I think. I cannot think of any other radios which use them off of the top of my head.
Mudslinger - Simon
26TM274
26CT612
There is no such thing as a Fidelity 1000 which is too good to scrap.
26TM274
26CT612
There is no such thing as a Fidelity 1000 which is too good to scrap.
Re: Uniden 100 stuck in tx
Ok thanks for the info.Mudslinger wrote:The signal meter on these is the upside down type where the needle comes up from underneath the meter, and they can be hard to find.
Needs to come from another Uniden 100 or an Audioline 340 I think. I cannot think of any other radios which use them off of the top of my head.
- cb4ever104
- Legend
- Posts: 6561
- Joined: 28 Jul 2011, 21:26
- Location: España
Re: Uniden 100 stuck in tx
Not really hard to find . Just expensive with the shipping etc.Mudslinger wrote:and they can be hard to find.
http://www.ebay.co.uk/itm/192204311828
30TM060
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.
Paul aka "Sammy". (108) PY60 Old Paisley DX Group (RIP Rab Markie)
Ex GM0 , now EA5 .
Handle "Fortune Hunter" back in "the day"
Radios ....? Anything that says "TAIWAN R.O.C" on the back.