Programming Entel HX 480
-
- Regular
- Posts: 11
- Joined: 08 Feb 2013, 18:18
- Location: Coleraine
Programming Entel HX 480
Hi, I have got a few Entel HX480 and wanting to program them to 446.
I have got the CPROG400G software.
I have added a 3.5mm to 2.5mm jack converter to my cable for my Icom icr5, although when I try to read from the radio (HX480) it fails.
The cable connects my scanner grand, and I have changed the COMM Port to 1 and 2 with no luck. Does anyone have any idea were I am going wrong.
Thanks.
I have got the CPROG400G software.
I have added a 3.5mm to 2.5mm jack converter to my cable for my Icom icr5, although when I try to read from the radio (HX480) it fails.
The cable connects my scanner grand, and I have changed the COMM Port to 1 and 2 with no luck. Does anyone have any idea were I am going wrong.
Thanks.
-
- Super Member
- Posts: 124
- Joined: 20 Apr 2011, 11:36
Re: Programming Entel HX 480
I also had problems with the 3-pin connector.
Just got me a 4-pin video connector of 2.5 mm worried.
Cut off the end and solder a 3 pin socket.
I associate this with the ICOM OPC 478 interface.
Goes perfectly.
Just got me a 4-pin video connector of 2.5 mm worried.
Cut off the end and solder a 3 pin socket.
I associate this with the ICOM OPC 478 interface.
Goes perfectly.
You do not have the required permissions to view the files attached to this post.
-
- Regular
- Posts: 11
- Joined: 08 Feb 2013, 18:18
- Location: Coleraine
Re: Programming Entel HX 480
Would this adaptor work something similar
http://bit.ly/ZaNfDf
Would it save me cutting and soldering.
http://bit.ly/ZaNfDf
Would it save me cutting and soldering.
-
- Regular
- Posts: 9
- Joined: 25 Oct 2013, 15:38
- Call Sign: Sflaiss
Re: Programming Entel HX 480
Hi guys i have USB cable of my boafeng, is it the same?wasserbueffel wrote:I also had problems with the 3-pin connector.
Just got me a 4-pin video connector of 2.5 mm worried.
Cut off the end and solder a 3 pin socket.
I associate this with the ICOM OPC 478 interface.
Goes perfectly.
-
- Regular
- Posts: 11
- Joined: 08 Feb 2013, 18:18
- Location: Coleraine
Re: Programming Entel HX 480
Hi folks,
I gave up in trying to program these a while ago but still kept them, I have now got a hold on an original Entel earpiece. I am now looking to know what cable I need to connect / solder.
I have found some info on the net says to get a 2.5mm jack 3 contact and put GND and put ex/txt on same second contact (in the centre) and no like in the last.
Can anyone tell we what I need to do and what wires go where
I gave up in trying to program these a while ago but still kept them, I have now got a hold on an original Entel earpiece. I am now looking to know what cable I need to connect / solder.
I have found some info on the net says to get a 2.5mm jack 3 contact and put GND and put ex/txt on same second contact (in the centre) and no like in the last.
Can anyone tell we what I need to do and what wires go where
You do not have the required permissions to view the files attached to this post.
Re: Programming Entel HX 480
Hi there, I'm really sorry to bump this topic, but I've recently got a HX480 without cable & the software. (at least a working battery and charger)
I've contacted Entel, but as this is a more than 9 year old device they no longer have the ability to provide either the cable and software.
I saw that some people here have the CPROG400G software, and building the programming cable seems fairly easy.
Would it be possible for those who have the software to share it? That would be really nice.
Many thanks
Godzil/Manoel
I've contacted Entel, but as this is a more than 9 year old device they no longer have the ability to provide either the cable and software.
I saw that some people here have the CPROG400G software, and building the programming cable seems fairly easy.
Would it be possible for those who have the software to share it? That would be really nice.
Many thanks
Godzil/Manoel
-
- Super Member
- Posts: 354
- Joined: 28 Jun 2011, 12:18
- Location: Manchester , Uk
- radiogaga
- Top Poster
- Posts: 1477
- Joined: 04 Sep 2010, 20:37
- Call Sign: 26TM399
Re: Programming Entel HX 480
moj wrote:Here you go Godzil , wont be up long tho
https://www.dropbox.com/s/mf77dwfcprd6p ... G.EXE?dl=0
Any chances again please
26TM399 Hampshire and Isle of Wight
30TM399 Northern Costa Blanca
30TM399 Northern Costa Blanca
-
- Super Member
- Posts: 354
- Joined: 28 Jun 2011, 12:18
- Location: Manchester , Uk
- radiogaga
- Top Poster
- Posts: 1477
- Joined: 04 Sep 2010, 20:37
- Call Sign: 26TM399
Re: Programming Entel HX 480
Great Thanks -
26TM399 Hampshire and Isle of Wight
30TM399 Northern Costa Blanca
30TM399 Northern Costa Blanca