Alinco DX-R8E Serial Commands
- scan125
- Super Member
- Posts: 179
- Joined: 18 Jul 2014, 09:52
- Call Sign: 26TM8080
- Location: Wrexham, North Wales
- Contact:
Alinco DX-R8E Serial Commands
Does anyone have or can provide info/pointers on the serial API commands for the Alinco DX-R8E (or DX-SR8 / DX-SR9) unit please.
Nick - Author Of: Scan125 - Scan75 - DriveR8 - http://www.nick-bailey.co.uk
- owza
- Super Member
- Posts: 337
- Joined: 16 May 2011, 10:26
- Call Sign: M0
- Location: NW, UK
- scan125
- Super Member
- Posts: 179
- Joined: 18 Jul 2014, 09:52
- Call Sign: 26TM8080
- Location: Wrexham, North Wales
- Contact:
Re: Alinco DX-R8E Serial Commands
Thanks.
Have already seen and noted this BUT he is actually hacking the receiver's detachable control head to main unit interface and not using the exterior serial connection point.
I've yet to trawl through the schematics to see if there is any commonality between the two different Txs & Rxs. (read head interface vs external interface)
Have already seen and noted this BUT he is actually hacking the receiver's detachable control head to main unit interface and not using the exterior serial connection point.
I've yet to trawl through the schematics to see if there is any commonality between the two different Txs & Rxs. (read head interface vs external interface)
Nick - Author Of: Scan125 - Scan75 - DriveR8 - http://www.nick-bailey.co.uk
- owza
- Super Member
- Posts: 337
- Joined: 16 May 2011, 10:26
- Call Sign: M0
- Location: NW, UK
Re: Alinco DX-R8E Serial Commands
Oh OK, I notice an Extio.dll exists for the Alinco, perhaps this contains the commands? If whoever wrote it can be tracked down?
- scan125
- Super Member
- Posts: 179
- Joined: 18 Jul 2014, 09:52
- Call Sign: 26TM8080
- Location: Wrexham, North Wales
- Contact:
Re: Alinco DX-R8E Serial Commands
Well I've found a few commands on the web for the DJ-X11 which is supposedly similar.
Won't know till after Xmas as my DX-R8 is currently sat firmly under the Xmas tree
Once I get my hands on it I be able to hopefully work out a reasonable command list by "inspection". Perfectly legal and above board. Just a pain in the arse!
Won't know till after Xmas as my DX-R8 is currently sat firmly under the Xmas tree
Once I get my hands on it I be able to hopefully work out a reasonable command list by "inspection". Perfectly legal and above board. Just a pain in the arse!
Nick - Author Of: Scan125 - Scan75 - DriveR8 - http://www.nick-bailey.co.uk
- owza
- Super Member
- Posts: 337
- Joined: 16 May 2011, 10:26
- Call Sign: M0
- Location: NW, UK
Re: Alinco DX-R8E Serial Commands
It's a nice radio, the IF Shift work well. The manual is wrong, it works fine in AM mode.
-
- Super Member
- Posts: 224
- Joined: 03 Apr 2011, 08:11
Re: Alinco DX-R8E Serial Commands
Pm sent. I may be able to help you out with the command set
- scan125
- Super Member
- Posts: 179
- Joined: 18 Jul 2014, 09:52
- Call Sign: 26TM8080
- Location: Wrexham, North Wales
- Contact:
Re: Alinco DX-R8E Serial Commands
tomos
Can't see the PM yet.
Please re-send.
Nick
Can't see the PM yet.
Please re-send.
Nick
Nick - Author Of: Scan125 - Scan75 - DriveR8 - http://www.nick-bailey.co.uk
-
- Super Member
- Posts: 224
- Joined: 03 Apr 2011, 08:11
Re: Alinco DX-R8E Serial Commands
I have sent that again ... If you can PM me with an alternate email address NIck ?