Replacement Astatic Mic Lead?

[PeterA]

Anyone recommend the best place to get a replacement 6 core mic lead for an Astatic MOD 575-M6 Teardrop.

Found a couple non genuine (obviously) from the US... but none this side of the pond that look good enough?

[ch25]

4 wires is enough. No need for 6.

[PeterA]

4 wires is enough. No need for 6.

Appreciate the reply... normally yes... but need the extra 2 for up/down buttons.

[ch25]

That explains 6
https://www.ebay.co.uk/itm/6-Core-PIN-1 ... 2628689043

[PeterA]

That explains 6
https://www.ebay.co.uk/itm/6-Core-PIN-1 ... 2628689043

Yep, Sent them a message already asking about coiled length etc.

Another I've messaged the seller about is claiming 3m length (uncoiled obviously) for £6.35...

Put this thread up to see if anyone recommended others I've not seen or come across.

Appreciate your replies though... Thanks!

[The Collector]

Another:

https://rover.ebay.com/rover/0/0/0?mpre ... 3220458916

[PeterA]

Another:

https://rover.ebay.com/rover/0/0/0?mpre ... 3220458916

Perfect, Thanks!

[26VT01]

https://rover.ebay.com/rover/0/0/0?mpre ... 2926073551

The restraint on that will fits well with a little shaving where the 2 mic shell halves fit. . The cable isnt that long or fat though. Weare CB (usa) have something original looking at 17 dollars but they don't take international payments.

[26VT01]

This is part of the title for when the ebay item link dies
"Replacement Mic Cables Cord Wire For YAESU MH-48A EL"

[PeterA]

https://rover.ebay.com/rover/0/0/0?mpre ... 2926073551

The restraint on that will fits well with a little shaving where the 2 mic shell halves fit. . The cable isnt that long or fat though. Weare CB (usa) have something original looking at 17 dollars but they don't take international payments.

Appreciate the link... Picked up a 6 pin mike extension lead in the end to replace the one on the teardrop.

The other one I got would be more suited to a K40 in my opinion.

Thanks.

[The Collector]

When I did up my white and gold Astatic 575-M6, I ordered an off-white mic' lead from the US. I then used a spring-type restraint from another type of 'mic (similar to this one on the pic', but without the gaps in it), but gold-plated it first, as well as gold-plating the 4-pin plug.

It's like a blingy thing living in blingyland

[PeterA]

When I did up my white and gold Astatic 575-M6, I ordered an off-white mic' lead from the US. I then used a spring-type restraint from another type of 'mic (similar to this one on the pic', but without the gaps in it), but gold-plated it first, as well as gold-plating the 4-pin plug.

It's like a blingy thing living in blingyland

Now that does sound Bling!

Yep, Astatic 636L Mics have those spring type strain relief...

I picked up the 6 core extension lead for £7.90inc p&p.

The other one which is more suited to a K40 lead was £5.30inc p&p.

So can't complain about the prices really...