I've worked it out now, its seems to be accurate enough for the moment. Thanks for the advise and help guys.MrWeetabix wrote: ↑10 May 2018, 12:04again, in this instance, his cheap 'junk' meter is reading the same as another meter and the meter in his radio.... so I'd say that whilst you may regard it as junk, it's giving a decent indication of SWR. You can't argue with facts.
Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
This is the place to discuss any general CB radio related topics. Getting started, installations, operation etc.
- Posts: 2675
- Joined: 24 Jan 2012, 21:26
- Call Sign: 26TM413
- Location: South East Coast UK.
CB call. Shipwreck.
- Super Member
- Posts: 498
- Joined: 03 Dec 2016, 11:07
- Call Sign: n0call
- Location: Poland
The same reading does not prove anything Craig Facts are that I measured dozens of cheap cb swr meters and none of them showed the truth. You only guess that it is decent reading.
EOT for me. I can not show you how bad it is, but if someone is willing to check it by themself, take 100 Ohm non inductive resistor wattage high enough to handle transmitted power, plug instead of antenna and measure swr. It must show 2.0. Meter we talk here will show 1.4-1.6 what disqualifies it to use.
A few years ago we did a check in one of local CB shop and none of meters they had worked properly. That give a picture of what you can expect buying stuff like that. Wasted money.
Expensive meters can be junk too, 3rd Daiwa 801HP I bought was showing as it should. 2 previous I had to return to seller, because It was impossible even to calibrate them by internal pots.
So, try before buy.
You can't have too many antennas...
Who is online
Users browsing this forum: No registered users and 6 guests